Main Navigation

Adiacoat Properties

Applications
  • Water Pump Impellers
  • Water Pump Housings (Inner and Outer)
  • Pipes (Inner and Outer)
  • Slurry Pumping
  • Waste Water Applications / Tanks
  • Pumping River Water With High Sand and Silt Content
  • Pumping Water Containing Abrasive Solids
Advantages
  • 100% solids, meets VOC regulations
  • Flexible, over 400% elongation
  • Remains flexible in cold temperatures
  • Maximum use temperature of 60°C
  • Return project to service in less than 24 hours
  • Cures from -5°C to 55°C
  • Odorless, no toxic vapors
  • Excellent in areas contaminated by petrochemicals
  • Resists fuel and chemical spills


Adiacoat Data Sheet
Cured Sealant Properties Typical Value Test Method
Solids Content
Shore Hardness
Elongation
Tensile Strength
100% Modulus
200% Modulus
Tear Strength
Taber Abrasion
(1-kg load,1000 revs, H-18)
Pot Life
Tack Free
Initial Cure
Final Cure
100%
70-75A
450-600%
6000 psi
125 psi
200 psi
87 pli @ 25ºC
620 mg wt loss

5 min
30 min
18 hrs
5 days
ASTM D2240
ASTM D412
ASTM D412
ASTM D412
ASTM D412
ASTM D624
ASTM D4060

If you would like more information please feel free to download  a brochure or contact us at info@adiabatics.com
or call us at (812) 372-5052
3385 Commerce Drive • Columbus, IN  47201 • Phone:  (812) 372-5052 • Fax:  (812) 372-4470
Content copyright . Adiabatics Technologies, Inc. All rights reserved.